CMUT 3D

May 11, 2018By Jeff DobsonExamples, MEMS No Comments

CMUT displacement in collapse-mode Model Description Axisymmetric model of a simple Capacitive Micromachined Ultrasonic Transducer (CMUT) operating into a water load. Basic Model Schematic   Parametric Variables The model allows the following design variables to be adjusted to control design metrics such as the fundamental frequency of the CMUT: Parametric Variable Description Default Value  ThkGap … Read More

FBAR 3D

May 10, 2018By Kevin Chan5G RF & Filters, Examples No Comments

3D FBAR Surface Deformation at Resonance Model Description Film bulk acoustic resonators (FBARs) can often exhibit spurious modes across the pass band which is one of design challenges an RF engineer faces. OnScale gives engineers the ability to quickly prototype a design to understand how effective it is removing these modes. The 3D FBAR model … Read More

FBAR 2D

May 9, 2018By Kevin Chan5G RF & Filters, Examples No Comments

FBAR Displacement at Fs Model Description Film bulk acoustic resonators (FBARs) are a widely known technology used for RF filter applications. They are typically operated at 1.5 GHz and over due to their excellent performance in terms of high quality factor and low insertion loss. The 2D FBAR model provides a simple starting structure consisting … Read More

FBAR 3D – CAD

May 4, 2018By Kevin Chan5G RF & Filters, CAD, Examples No Comments

FBAR Simulation in Designer Interface Model Description Simulating FBARs has long been seen as a challenging subject due to their inherent electromechanical coupling and their relatively large acoustic size. OnScale allows full 3D models of these devices to be simulated in the time domain, providing a full spectrum of results from a single simulation. With … Read More

Tonpilz Transducer 3D – CAD

May 4, 2018By Kevin ChanCAD, Examples, Sonar, Transducer No Comments

Displacement of Tonpilz at Peak Compression and Tension Model Description The Tonpilz or “Acoustic Mushroom” are able to achieve a combination of low frequency and high sensitivity in a compact footprint which makes them ideal as projectors for sonar applications. The 3D CAD is a quarter symmetric model of a Tonpilz stack with water load in … Read More

SAW 3D – CAD

May 4, 2018By Kevin Chan5G RF & Filters, CAD, Examples No Comments

Full 3D SAW Surface Displacement Model Description This full 3D model of a single port Surface Acoustic Wave (SAW) filter provides a complete picture of device performance. By simulating the device in full 3D a range of parasitic effects can be considered to avoid carrying undesirable performance into production. The model comprises a pair of … Read More

Time of Flight Diffraction 2D – CAD

May 4, 2018By Kevin ChanCAD, Examples, NDT No Comments

Maximum acoustic pressure field Model Description TOFD is a flexible technique, which relies on a range of mode converted signals to be effective. OnScale combines the capability of accurately simulating mode conversion in arbitrary geometries, with the speed to run large batches of TOFD models, making it an ideal tool for improving inspection setup. Time … Read More

Transducer 3D – CAD

May 4, 2018By Kevin ChanCAD, Examples, Transducer No Comments

3D Transducer model (left) and maximum acoustic pressure field (right) Model Description Transducer design is one of the many applications that OnScale’s core solvers are tailored for. From simple monolithic piezoelectric transducers to complex curved 1-3 piezocomposite array, OnScale can handle it. As a demonstration, here is a 3D simulation of a simple transducer submerged … Read More

TC-SAW Design Study

April 20, 2018By Kevin Chan5G RF & Filters, Examples No Comments

Overview Temperature compensation technology in Surface Acoustic Wave (TC-SAW) devices allows for improvement in their performance. OnScale enables designers to explore many TC-SAW device design spaces to offer a greater insight into the optimum design. In this example, we simulate a 3D unit cell model of a TC-SAW device to analyse the effect of electrode … Read More

TC-SAW 3D

April 20, 2018By Kevin Chan5G RF & Filters, Examples No Comments

Full 3D TC-SAW Surface Displacement Model Description This full 3D model of a single port Temperature Compensated (TC) Surface Acoustic Wave (SAW) filter provides a complete picture of device performance. By simulating the device in full 3D a range of parasitic effects can be considered to avoid carrying undesirable performance into production. The model comprises … Read More